Review of IM.Master 9826-2 Helios Drift Sports Car Blocks on 18th May.2023

By From The Pubic of Wechat May 18th, 2023 2154 views

▼Finishing pictures show.

▼The front is the best-looking angle + background of the car, and it is worth mentioning that the right side has the motor combination used for the dynamic version, and there is an R/C in the lower right corner, which seems to be aimed at this series. Various information on the back, as well as the angle behind the car, but also open and close the door.

The box uses a variety of processes, the lower right corner in the silver background marked with the item number 9826-2, a total of 2443pcs, 1:10 scale, the size of 50.5 × 24.7 × 13cm, and the Sun God is a different size, and this time the chameleon color of the three primary colors, purple to green gradient between.

▼Flip open the outer box, finally upgraded to a step-by-step sub-package! ABCD four major steps, and a package of universal package.
Four functional wheels with utility model patents for blocks. By the way, science and technology, Vanguard has a patent for the McWheel.
Standard dynamic version, the motor will be in a package.

▼The instructions are clearly printed, but note that the black parts are a bit like dark gray in the instructions. There are parts length 1:1 comparison table, by the way the technology panel are numbered, which allows you to distinguish between left and right.
A laser effect sticker, the assembly steps are only indicated by red arrows, you can see the effect of each step after completion.

▼A total of 99 pages and 481 steps of assembly steps. The last page is the parts list.
It is understood that this set is a fully dynamic version, there is no static, we should test the normal of each motor by power before assembling. The interface is RJ11 (6P4C), which is normally used for telephone lines, is not compatible with other brands of motors.

▼Open spelling up. Step sub-package will be expressed in a most simple way, with A you can spell the effect below, BCD is not used. Remember the previous Sun God? When the front wheel is connected to the splitter box, it will be a little tight, just the right distance, this time the entire structure of the Chameleon has been changed!!! These are two different structures of the car.
The off-white motor is used for door opening and closing, and the whole module is mounted diagonally.

▼ Which should pay attention to, there are two kinds of gradient parts, one is on the protective paint, smooth and highlight effect, the manual will be a bit of the flash mark, generally used for the outermost appearance of the coverage.
Front shovel and dashboard + front cover is a separate piece.

▼ soon put together, there will be very many more parts, that is, within the kit, in fact, is to give more parts in advance everyone, to prevent the lack of parts, but give too much.

Tips, the red hose in the tail installation is more difficult to complete with the help of tools, we recommend that you cut a little shorter, leaving the hose can be added to the front of the car, the color scheme will be more combat frame.

▼Lastly, we will stick the stickers, so you can look at the effect of the plain body first.
By the way, some parts of the stickers will interfere, so it is recommended that you put them together as you go.

▼Finished product 360 degree display.

▼I believe you have seen this color changing paint, which will switch between green and purple.

The stickers on both sides of the front surround will interfere, so you can take the silver parts out first and put them on afterwards.

The effect of the eyebrows is much more beautiful than the previous version of Gouda, two eyebrow parts sandwiched by a tube is a good effect, you can learn this way of assembling.

▼Side view of the wheel is a multi-width style with a red sticker in the middle, like a tooth. The parts of the rearview mirror are unique molds.

▼The Y exhaust at the rear is also one of the marks of the Sun Devil, and the structure has been changed this time, the angle is fixed, so there will be no adjustment of the crooked situation. The diffuser at the rear is connected with two suspension shocks.

The red hose in the middle of the rear wing is normally more difficult to install, I am cut a knife, the tip into it is easier.

The dashboard is made of stickers, and the front cover is not open and closed.

I use a lot of GIF pictures below to introduce the dynamic performance of this car.
The car has no suspension, no rebound effect, and no steering structure when turning forward. Steering is achieved entirely by the wheels, and there is no problem turning in place.

Battery box switch at the bottom, long press to open, then open the remote control can be successfully paired.

The same goes for mobile phones. Turn on the battery, then open the app and tap the Bluetooth icon.

The C port is for the door opening and closing.

AB port is for the left and right ends of the front and back of the two wheels.

Controlled by cell phone, the reflection speed is also fast.

In the "two-wheel drift" mode in the app, you can individually click the four buttons in the four corners, all of which are preset by the software for one-touch drifting effect. The upper left and upper right ones are to make the car run forward for a while and then make a tailing action. The lower left and lower right ones are to make the car run backward for a while.

Among them, there will also be a tailing while opening the car door of the awesome action, sure the driver will not be thrown out?

In the app, change to the "four-wheel drift" mode, you can play like a normal remote control car, the drift is divided into left and right drift, and then cooperate with the forward and backward movement, complete a beautiful action!

Thanks for your visiting! If you are interested in that,can get Here available!

Review of JIESTAR 89154 The Meeting Point Blocks on 3th May.2023

Back to 1983! BWR106 Upside Down World: Flip the World, Face the Abyss

Sign In

Review of IM.Master 9826-2 Helios Drift Sports Car Blocks on 18th May.2023