Review of C61048 Fantasma Sports Car Building Blocks on 21st Feb.2023
By From The Pubic of Wechat
February 21st, 2023
Instructions, stickers, and replacement parts cards are all wrapped together.
4346 pieces of blocks are divided into only 8 step sub-packages, that is, an average of more than 500 pieces per sub-package, you have to pay attention to the opening of the puzzle.
The subcontracts are as follows:
Assembly process:
After assembling a large number of connecting parts:
For the new Parts?
After finishing the three subpackages, I still don't know what the function of the linkage except the piston part is, and I also feel that the assembly difficulty is not low at all.
The fourth subpackage is the internal structure of the first half:
The front and back halves finally fit together. Next comes the phase where the assembly is slowed down by the increase in size.
Finally started building the shell section!
After nearly two days of assembling, finally this handsome Fantasma finished! First, let's take a multi-faceted photo to show you!
The front part is composed of various panel parts, and the flexible shaft plays the function of "hook line" here.
This striking gear is for steering.
It is worth noting the angle of the steering, the steering wheel is close to 180° before the wheel appears to turn significantly. There is also a "cushion" in the middle of the turn, and this performance is very different from other 1:8 cars I have come across.
Independent suspension on all four wheels is standard. I'm not sure if the wheels are new.
The interior panels are all represented by stickers.
There is a push bar between the seats, and three levels indicate whether the rear gears operate (top to bottom) right, left, or left doors. It took a long time to realize that the signs were the top view to...
A rare moving part was also found: the seat could be moved back and forth! It can be adjusted as long as it is pushed and pulled.
In fact, I always think it is a pity that the large proportion of technology cars have no Windows. Why can only hollow out without proper building blocks? Can't you just fill it in with transparent film or something?
Because the door opens and closes with scissors, there is a "fault" visible on the side.
The hardest corner of all time is going to be this corner, and this one works really well. We use a lot of limiting structures.
The left rear hidden a cross shaft sleeve, as long as you plug in the cross shaft and turn it, you can raise the front cover and back cover at the same time! This connection is quite powerful, super long travel and weight, rotation unexpectedly did not feel a lot of resistance, great!
Full open mode!
Hey!Guys!
That's All! Welcome to know more details Here available!
Previous
Review of JiSi 7144 The Ultimate Batmobile Building Blocks on 18th Feb.2023
Read More
Next
SEMBO 605029 MERRY CHRISTMSA Fantasy Christmas Gift
Read More
4346 pieces of blocks are divided into only 8 step sub-packages, that is, an average of more than 500 pieces per sub-package, you have to pay attention to the opening of the puzzle.
The subcontracts are as follows:
Assembly process:
After assembling a large number of connecting parts:
For the new Parts?
After finishing the three subpackages, I still don't know what the function of the linkage except the piston part is, and I also feel that the assembly difficulty is not low at all.
The fourth subpackage is the internal structure of the first half:
The front and back halves finally fit together. Next comes the phase where the assembly is slowed down by the increase in size.
Finally started building the shell section!
After nearly two days of assembling, finally this handsome Fantasma finished! First, let's take a multi-faceted photo to show you!
The front part is composed of various panel parts, and the flexible shaft plays the function of "hook line" here.
This striking gear is for steering.
It is worth noting the angle of the steering, the steering wheel is close to 180° before the wheel appears to turn significantly. There is also a "cushion" in the middle of the turn, and this performance is very different from other 1:8 cars I have come across.
Independent suspension on all four wheels is standard. I'm not sure if the wheels are new.
The interior panels are all represented by stickers.
There is a push bar between the seats, and three levels indicate whether the rear gears operate (top to bottom) right, left, or left doors. It took a long time to realize that the signs were the top view to...
A rare moving part was also found: the seat could be moved back and forth! It can be adjusted as long as it is pushed and pulled.
In fact, I always think it is a pity that the large proportion of technology cars have no Windows. Why can only hollow out without proper building blocks? Can't you just fill it in with transparent film or something?
Because the door opens and closes with scissors, there is a "fault" visible on the side.
The hardest corner of all time is going to be this corner, and this one works really well. We use a lot of limiting structures.
The left rear hidden a cross shaft sleeve, as long as you plug in the cross shaft and turn it, you can raise the front cover and back cover at the same time! This connection is quite powerful, super long travel and weight, rotation unexpectedly did not feel a lot of resistance, great!
Full open mode!
Hey!Guys!
