▼ black bottom lining up the physical picture, without too much coloring. Back is also the back of the explosion style back map.
▼No inner box, open it and you can directly draw out the parts package. The specific parts package is as follows, so you can compare.
▼ a manual in the same style as the outer box. Instructions with step-by-step sub-package, the completed steps or the original color display, to help troubleshoot errors, the entire product a total of 114 pages, 412 steps to complete, the vehicle has a quick release quick release motor design, you can finalize the finished product before the dynamic version of the upgrade, after playing with the motor unit quickly removed.
▼Two major stickers, a total of 51 stickers need to be pasted, the instructions are also to complete the overall vehicle and then stickers, but based on some parts are not very good stickers, I recommend that we are to complete the appearance of stickers.
▼Open spell. See the rack, you must pay attention to its connection gear and cross shaft positive relationship, and, the blue gear above is the future connection of the steering wheel, this position should also pay attention to the adjustment, this will affect the steering wheel whether the centering of the problem.
▼The suspension springs of the rear axle also rebound very well.
▼The engine is mounted diagonally, and the linkage gear at the back is also diagonally bitten into the gear below, a very special experience.
▼Front shovel installed, the feeling is very explosive change! The side two are also new parts oh.
▼ Huge unbelievable tail fin, of course, it is quick release, I will take it off later, I don't think it looks good.
▼ Finally, once the wheels are installed, even if it is finished, after that stickers, but I said with the experience of stickers and everyone, must be in the appearance of the parts just finished, to stick, there are several positions are parts to cover each other.
▼Finished product 360 degree display:
▼Top and bottom views.
▼The center net is very special! The style of the front shovel is also what I have seen in the real car, I was still unknown, this is going to be a construction team thing? To go to the construction site to shovel sand?
▼The doors can open and close normally, and the side can be seen where the stickers cover each other.
The spray-plated parts of the ▼K box are very distinctive and basically recognizable as different from the effects of other brand parties.
The taillights use three pairs of red transparent animal tailbone middle section, a special design.
The exhaust duct at the rear is also very special.
▼The doors in the middle also have an inset effect. The interior can be seen when opened, and the steering wheel has steering linkage with the front wheels.
The huge tail fin is a quick-release, quick-assembly design, which can be switched as soon as the ball head is connected and pushed below.
I personally like this state without the tail fin more.
▼As it is designed with power quick release and quick disassembly design, I took out my own motor to play with it.
Thanks for your visiting! If you are interested in that,can get Here available!
