Review of C61505 Ferrari Laferrari Sports Car Buildings Blocks on 11th Feb,2023
By From The Pubic of Wechat
February 11th, 2023
Box photo:
Instructions and stickers：
A total of 7 steps were subcontracted.
In addition, this will be divided into several parts of the car, in the end only once combined together, this "modular" assembly does have some freshness, but in the 1:8 ratio application, in the combination will appear a large number of pins and cross-hairs and other simultaneous assembly, coupled with the "module" volume and not necessarily "support position", resulting in the combination of the process of extraordinary difficulty, it is easy to appear all kinds of falling parts, extremely troublesome ...
Multi-sided photo of the finished product.
The front cover part is lift-off.
Adjusting the position of this gear inside can make the body tilt when guarding the steering.
The effect of pushing outward.
As I've said many times, the headlight corners are the hardest part of a technology car, and even this nearly 100% restored Rafa is not satisfactory.
In addition, there are two "hidden switches" that can be linked using the crosshairs, the yellow arrow is to control the steering, the front wheels and steering wheel will follow the linkage; orange is to adjust the height of the chassis.
This is the lowest state:
This is the lowest state:
The side view of the door is pretty good.
The door is punched in the same way as the real car.
The interior is extremely rich.
The rear wheel section is also very nice to look at.
The top of the rear cover has also seen, with a large number of angular structure to restore, the effect is the naked eye to see the shock. The tail section is also the same high degree of restoration.
There is a linkage organ in the place of the tail fin.
Lift the tailcap to see the engine part; used a variety of pipes to increase the sense of reality.
Nice Picture:
Thanks for your visiting! Welcome to know more details Here available!
Previous
Review of DZ6007 Magic Railway Station Building Blocks on 6th Feb,2023
Read More
Next
SEMBO 605029 MERRY CHRISTMSA Fantasy Christmas Gift
Read More
Instructions and stickers：
A total of 7 steps were subcontracted.
In addition, this will be divided into several parts of the car, in the end only once combined together, this "modular" assembly does have some freshness, but in the 1:8 ratio application, in the combination will appear a large number of pins and cross-hairs and other simultaneous assembly, coupled with the "module" volume and not necessarily "support position", resulting in the combination of the process of extraordinary difficulty, it is easy to appear all kinds of falling parts, extremely troublesome ...
Multi-sided photo of the finished product.
The front cover part is lift-off.
Adjusting the position of this gear inside can make the body tilt when guarding the steering.
As I've said many times, the headlight corners are the hardest part of a technology car, and even this nearly 100% restored Rafa is not satisfactory.
In addition, there are two "hidden switches" that can be linked using the crosshairs, the yellow arrow is to control the steering, the front wheels and steering wheel will follow the linkage; orange is to adjust the height of the chassis.
This is the lowest state:
This is the lowest state:
The side view of the door is pretty good.
The door is punched in the same way as the real car.
The interior is extremely rich.
The rear wheel section is also very nice to look at.
The top of the rear cover has also seen, with a large number of angular structure to restore, the effect is the naked eye to see the shock. The tail section is also the same high degree of restoration.
There is a linkage organ in the place of the tail fin.
Nice Picture:
Thanks for your visiting! Welcome to know more details Here available!
