Review of MY88010 Sports Super SUV Car Building Blocks on 2rd Sep.
Hello !
Let's talk about the MY88010 Sports Super SUV Car Bricks.
▼2991 pieces, the courier pressed my box, but it did not affect the assembly. The front is a black background with a rendering, and the details and movable parts are introduced on the back. The lower right corner is marked as 1:8 scale.
Standard static version, you can bring your own or purchase dynamic upgrade package for remote control version upgrade, dynamic components include (L motor*2, servo motor*1, remote control*1, 2.4G lithium battery*1)
▼Drawer type pulls out 2 inner boxes. The various parts packages are as follows, you can compare them. Of course, this wheel hub is also an old actor, and everyone in Moyu has seen it almost every time.
▼A manual, with step subcontracting, a total of 6 major steps.
The standard version is the static version, and Moyu has designed a quick-release switch for it. After finishing the static, you can install the dynamic components in a few minutes.
▼The sticker is done after the final completion, and 2 stickers need to be pasted in a total of 55 positions.
Parts are Golds parts. The general-purpose pins are classified, and the pins of Gaudes have been updated. They are not tight when they are inserted, and the tightness is appropriate.
▼The fight is over. Starting from the front axle, when encountering the rack parts, everyone remembers to pay attention to the centering of the cross shaft connected by the intermediate gear.
Connecting the engine is basically the same. The front suspension system only uses a suspension spring.
As a reminder, in step 69, the No. 4 cross shaft with cut-off used is No. 3 and No. 5. The colors are the same, so it is easy to get it wrong. It is recommended that the manufacturer can use one length for each color, and fool-proof design is still necessary.
The body + rear axle is very easy to put together, and there are two suspensions on each side of the back, and the rebound effect is very good, and then you can just dock it.
▼The car body is designed according to the front and rear drive scheme. Since I don't have 2 L motors, I only use one to demonstrate the action, the same! The appearance of the drive shaft in the middle will be a shell with parts, but it is not connected to the rear.
The headlights are transparent hockey sticks, and the front of the car is an integral module.
▼ This car feels that the designer is packaged and assembled one by one, which is very good when dismantling the car.
Of course, the operation of step 181 cannot be pressed by hand, and only a hammer can be used to help.
4 identical seats, I don't want to fight each time this kind of repetitive operation, I want to fight only one driver's seat and a roll cage behind it,
The four doors are pulled by rubber rings and are designed to close automatically. The roof is one piece.
Note the special part at the end, I see it for the first time.
Finally put the wheels on, the whole product is finished, 4 wheels.
Finally look at the vegetarian car, I put a sticker.
▼360-degree display of finished products:
▼Top view and chassis:
▼The nasolabial pattern on the front face is also one of the most restored lines. You know this car logo and English.
The effect of the headlights is average, and the green inside does not look very beautiful. The suspension makes the car stand very high, and the attitude is very off-road.
▼The rear wheel is more exaggerated, and you can directly see the opposite scenery. The rearview mirror is actually a three-dimensional design, which is worthy of praise. The front cover is designed with a support rod, and when you hold it, you can see the big heart of the V8.
The previous four special parts are used for the connection of the A-pillars. This method is good and can be used in the future. I like it.
▼How tall is the car body? Taller than my placard figure! Looking at the roof from the side, there are many holes in the roof. In fact, some light panels can be added to decorate it. The trunk lid is a hatchback design, and the spoiler at the bottom is a bit loose on both sides, which may fall off when touched.
▼The design of the rear lights is segmented. After the tailgate is lifted, the space inside is very large.
▼The rebound effect is perfect. The rebound travel is very long and the stance is very good.
The front hood can be opened and closed, with support rods. The door can be opened, and the door will automatically close when you let go, but the opening angle cannot be fixed.
The rear wing can be adjusted in angle, and the rear can be lifted as a whole. Steering is linked, but steering wheel rotation is reversed.
▼ After reading the manual, the quick-release design is also very convenient for us to operate, then take out the ancestral dynamic components, there is only one motor of each size at home, so just connect a single L, the same!
Turn the car upside down and connect the servo and L motor directly, that's it.
Then connect the interface of the motor, according to your operating habits, to the remote control, and place the battery in the middle of the rear seat and the trunk to hide it, which is more beautiful!
The difficulty of assembling is average. Children with certain assembling experience can complete it independently. Some steps require the help of adults.
Green has become the annual color matching of building blocks since 2020, and this year, many products are still using this color matching.
The stance is very high and has an off-road feel. The modular design of the whole car will also make me feel that there will be no broken feeling, many of which are the feeling of connecting parts one by one.
From the perspective of design ideas, it seems that this is also a feeling more like a class, and I also like modularity.
Moyu seems to have made the motor quick release and quick installation standard. It really means that you can play as long as the motor is slammed, and you can use it for the next building block after you finish playing.
Under dynamic conditions, it can run, link, and steer. For those who have already built dozens of cars, there are no surprises, but I can easily remove the motor for the next car, which I think is very complimented.
The door has an automatic closing function. When you pull it out and let go, it will automatically bounce back, and the rebound effect is also great. Just don't pull too hard, the rubber ring will break.
To sum up, I personally think it is an entry-level technology car in a good domestic building block experience package.
(The above is just my personal opinion, if you don't like to ignore it)
Ok,That's all! We will see you Next time
Welcome to Purchase Here if you are interested in that.
