X
Home > Blog > Review of MK21002 Star Wars space cruiser Republic Cruiser Building Blocks on 6th Apr.2023

Review of MK21002 Star Wars space cruiser Republic Cruiser Building Blocks on 6th Apr.2023

By From The Pubic of Wechat April 6th, 2023 283 views
.Product Information: ·Dealer: Barweer Building Block ·Item No. : MK21002 ·Product Name: Republic Cruiser ·Theme: Star Wars ·Bricks Blocks: 8338±pcs ·Material: ABS Plastic ·Ages: 14± .Warning: can not eat
Review of MK21002 Star Wars space cruiser Republic Cruiser Building Blocks on 6th Apr.2023
The packaging of the box, a good look like a hand-held harpoon gun.The box reaches an amazing 16KG.
There are AB and 2 inner boxes inside, look at the Minifigure comparison.A box, is 1-9, plus universal package;
These giants, Mould King still thoughtfully presented the hammer

The instructions are divided into AB, 2 books; but the thickness is amazing!
Box B is the 10-21 package; except for a very few Go-Bricks without molds, are Go-Bricks parts.
Open spell. As we know the finished product is 1.2 meters, so we must first find a good place to put it together, because the finished product nearly 30 pounds, so difficult to move the location. 1 package is to put together the base.
Put together, the base is really exaggerated large, my photo stand are almost put incomplete.

The interior has an anti-dull design, that is, the color is not the same. The green one is the stern.​​​​​​​
Blue center:
The technology plus brick pattern composition is used.​​​​​​​


When you see the manual with this green pointing at each other, it means that these 2 parts are available, and generally we arrive at the right side of the parts.​​​​​​​The nose of the ship is yellow. The interior is certainly no interior, because the internal structure is very important, will not fall apart, depending on whether the structure is tight.
After putting together the main structure before, start to put together the veneer on top.Put together a good multi-panel, are mirrored, because there is a left and right distinction.
Hinges are used to connect to the body.
This is a good way to put together a tetrahedron.​​​​​​​
Pistol grip look, a good number of long tubes, looks like a sense of technology. All the parts of the handle are finished, ready to connect the main body, and then finish.706 steps, the handle of the gun connected to the main body of only 6 points connected, the middle is not connected, suspended.
Harpoon head?
About 830 steps to start unscientific, because the whole hull is put, the bow will be stuck off, if installed in reverse, the instructions to make up their own brain flip effect.​​​​​​​
I am here to start assembling the appearance, all flip instructions to see, and installation is also installed backhanded.​​​​​​​
This large slope tile, unseen.​​​​​​​
The middle of the hull, the 2 large parts on the left and right, are distinguished in red. This interstellar series like to use this persimmon red plus light gray to do the appearance of the color scheme.​​​​​​​
This part directly dislike the main body with a pin. When installed, good tight, not afraid to loose.​​​​​​​
The effect of 2 sides after installation.​​​​​​​
1229, 1249, 2 large parts only 1x2 plate connection, very loose, very easy to fall. Inferno level pain; because it is a large part, only 1*2 connection, the ground lead state, too heavy things will fall.Then the solution is simple, 2fold, one is to increase the support below.
Another aspect is to increase the connection point between the parts and the hinge pieces, I added a lot of connection points to be perfect!

The side skirts, which are used to stabilize the hull like a cat's tail?
The perfect angle can be achieved only after modification.The most handsome thing about this battleship must be these aft engines.
But the effect that comes out is really nice, this fluorescent green effect.
Various oversized veneer parts. After putting it together, it's really nice again. After the final hull front panel is installed, it's done.
Finished product 360 degree display: finished product over 1.2 meters
More Details:
The general head is actually connected to the main body by 4 pins and the upper and lower trim panels are fixed.
There are four small gun barrels above the bow; multi-point gun barrels at the waist position, and this is the radar in front? The stern does not have the same type of gun barrel.
This bunch of propellers, good-looking, but the big ones are only 1 * 2 plate to connect, will be loose.​​​​​​​
Is this a torpedo at the bottom?
Can be reversed to see that the support of the transparent base is not used to connect the way, just put . The same below. Is also pressed on this transparent base.
The left and right waist decorations are different on this.​​​​​​​
The small turret, the role of a good fighter aircraft.​​​​​​​
A good number of panels are angled and do not go straight.
Radar, is this scientific?​​​​​​​
As a general rule, the blue one should be the cockpit where the captain and others are located.​​​​​​​
By caliber, this turret is the thickest yet.​​​​​​​
The main body support are put on directly, no connection.​​​​​​​
Thanks for your visiting! If you are interested in that,can get Here available!​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​
 
Review of PINBAO 7702 Office Buildings Blocks on 3th Apr.2023
Previous
Review of PINBAO 7702 Office Buildings Blocks on 3th Apr.2023
Read More
Next
Shipping Adjustment Notice from China to Germany 2024
Read More